THE ETCHING TOOL: The Etching Tool for the Cricut Explore, Cricut Explore Air, and Cricut Explore Air 2 sits in the "A" slot in the machine(s) and locks right into place per machine instructions (remove factory installed accessory holder first). It can be used to engrave & etch many materials, including acrylic, plastic, glass, metal, metal clay. Materials used should sit on the machine's mat and fit under the machine's rollers. Although the tool theoretically could etch steel/stainless steel, the machines don't provide enough pressure for success. Ensure the machine you use can accommodate the media you desire before committing to specific media use. PEN & MARKER HOLDERS: With the Chomas Creations adjustable Pen Holder, you can draw & sketch with up to a 3/8" (inch) pen. With the adjustable Marker Holder, you can draw & sketch with up to a 1/2" (inch) marker/pen. There are no height restrictions: simply add Pen or Marker Holder to your machine, adjust the height of your pen/marker with the provided craft stick, tighten the screw (made of durable plastic) and you are set to draw & sketch! The markers you use may not be centered in the Marker Holder. This does not stop them from drawing, it just means you won't be able to draw and then cut a shadow perfectly around the drawn design. THE ALUMINUM BLANKS: This bundle includes two (2) anodized aluminum blanks for practicing metal etching (color: blue). Blank size: 3.50" square (88.9 mm square) - Thickness: .016" / 0.406 mm / 26 gauge. For best results, remove any oils from blanks by wiping them with alcohol and allow to dry before placing on machine's mat. The blanks may be tumbled to remove burs after etching (30 minutes works well). PEN: Bundle also includes one (1) Pen of Seller's choosing.
BUNDLE, 5 ITEMS ~ The Etching Tool + 2 Anodized Aluminum Blanks (3.5" square) + Pen Holder + Marker Holder + Pen
FOR USE in the Cricut EXPLORE, EXPLORE AIR, and EXPLORE AIR 2 (Does NOT work in Explore ONE)
PEN / MARKER HOLDERS ~ Holds Pens up to 3/8" in diameter for the Pen Holder and Markers/Pens up to 1/2" for the Marker Holder ~~~ ANODIZED ALUMINUM BLANKS ~ 3.5" square (jumbo size!) provides plenty of engraving/etching practice space & front and back can be utilized.
THE ETCHING TOOL etches/engraves metal clay slabs, metal (not hard metals like steel/stainless steel), stencils, plastics/acrylics, some glass, more...
Made in the USA: The Etching Tool (Carbide Tip & Aluminum Housing), Pen & Marker Holders (Aluminum Housing, Rigid Plastic Screw) | Aluminum Blanks : Made in China