Creative Hobbies KM1 Kiln Sitter Cone Support Setting Gauge

Price: $8.95
Product prices and availability are accurate as of 2018-12-07 18:52:31 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

The Dawson Kiln Sitter firing gauge is a small metal disk used to adjust the Kiln Sitter actuating rod to ensure a safe and accurate firing. Use the gauge to adjust the actuating rod after every 20 or so firings. Place the gauge on the cone supports, sliding the actuating rod through the hole in the gauge. If the actuating rod is not centered in the porcelain tube, loosen the two screws on the guide plate and move the guide plate from side to side. Lift the Kiln Sitter weight to the raised position. With the firing gauge in place, the trigger should just barely clear the release claw, coming as close as possible without touching. If the gap is wrong, loosen the set screw in the center of the weight, move the trigger and re-tighten the set screw.

Product Features

A small metal disk used to adjust the Kiln Sitter actuating rod to ensure a safe and accurate firing. Use the gauge to adjust the actuating rod after every 20 or so firings. Fits all Dawson kiln sitters. Ensures accurate kiln firing temperatures for using Orton cones.

Write a Review