The UV Exposure Unit has a large 260mm x 210mm,Exposure Area which enables you to make several plates at once,as well as larger plates.Why waste time with smaller light weight units,when with the UV Exposure Unit you can save time,as you will be able to make several plates at once.
The power of the lamps determines the final quality and output of your printing plate.Smaller and weaker tubes will take longer and may not give you the consistency you desire. Nothing comes closer to the UV Exposure Unit for price,quiality,exposure area and build - after all,our customers on ebay speak volumes for our exposure unit - the same cannot be said for anyone else! Buy right first time.
Hot Foil Polymer Plates making
Letterpress Polymer Plates making
Pad Printing Plates making
Sandblasting plate making
Glass etching Stencils making
Rubber Stamps plate making
Screen printing plate making
How to use
1.Remove the cover film.
2.The artwork,on overhead transparency film,is placed on top of the plate.During exposure,the black areas in the artwork block out the UV light and the plate underneath will remain soft,the clear areas will let UV light through and will harden the plate below.
3.Scrub the plate in warm water washes away the soft parts of the plate
4.Dry the plate and post-expose.
Time Range: 0-330 seconds
Light power: 48W?six 8W UV fluorescent bulbs )
Machine size: 12.6"x12.5"x4.3"(320x317x108mm)
Package dimensions: 14.6"x14.6"x5.5"(370x370x140mm)
Net weight: 8.4Lb(3.8kg)
Shipping weight: 10.6Lb(4.8kg)
UV Exposure Unit x1